Amager Engineering ApS – outline of Amager island Amager EngineeringEngineering the Future +45 2283 8808
Home/About
About Amager Engineering

Active since 1 January 2017 – with experience that goes much further back

Amager Engineering ApS is based in Kastrup on Amager and works with machine builders and the process industry in Denmark and abroad. One person, a network of close partners – and a clear ambition: automation that works, and documentation that lasts.

Morten Jensen, Amager Engineering ApS
Morten JensenOwner and engineer
Morten Jensen

Installation engineer with both hands on the machine

I am an installation engineer with 12 years' experience as product specialist in electrical and automation for the process industry – and before that 5 years as a service electrician for housing and industrial work. I have wide experience with several PLC and HMI brands.

I am involved from A to Z in the making of a machine: from the early stages when the machine's specifications are discussed and I present my ideas for the best functionality, over the development of the automation part, to the commissioning of the machine.

Troubleshooting on site has been one of the most important ways to learn what a machine needs – and to listen to the people who operate it every day.

Documentation as a craft

Three documents that make the difference

A large part of my earlier work was documentation. Three types in particular decide whether a project runs smoothly – for the panel builder, for the operator and for whoever takes over later.

01

Block diagram

Gives a good overview of the equipment's different inputs and outputs – the map of the whole installation on one page.

02

Wiring diagrams and part list

The wiring diagrams combined with a detailed assembly list, so the panel builder can purchase exactly the right parts.

03

Operator manual

Explains to the end user how the machine is operated, how alarms are read and how signals are trended.

Siemens TIA Portal project on screen at Amager Engineering
Partners

A small company with a strong network

Amager Engineering has very good and close partners: a proficient technical drawing manufacturer, an experienced programmer and an electrical panel manufacturer in North Zealand. That is how a small company can deliver the whole solution – from drawing to finished panel – without you having to coordinate several suppliers.

  • Technical drawings – documentation that is ready for production
  • Programming – extra capacity on larger projects
  • Panel building in Denmark (North Zealand)
Courses and certifications

Continuously trained – from Step 7 to TIA Portal Safety

PLC platforms move fast. This is the training behind the work – from the electrical licence in 2007 to the latest Siemens and Pro-face courses.

  1. 2019
    Pro-face Blue V3.1 (Schneider)Hands-on course in Pro-face HMI software V3.1.
  2. 2018
    Simatic TIA Programming IBasic hands-on course in Simatic TIA Portal including WinCC and drive systems.
  3. 2018
    Simatic TIA Programming IIAdvanced hands-on course in Simatic TIA Portal including WinCC, SCL, Graph and drive systems.
  4. 2018
    Simatic TIA Programming IIIAdvanced hands-on course in Simatic TIA Portal including WinCC, SCL, Graph and drive systems.
  5. 2018
    Safety Advanced in Simatic TIAAdvanced course in safety functions in Simatic TIA Portal.
  6. 2018
    EFSTAS/Rosengren – Introduction to functional safetyFunctional safety IEC 61508 / IEC 61511. Design and engineering of safety systems.
  7. 2017
    Siemens TIA V14 ProgrammingBasic hands-on course in Siemens TIA Portal for the S7-1500 series.
  8. 2015
    Cross-functional training for specialistsModule 1.1: Accessing and influencing the decision-making process for product specialists.
  9. 2011
    ECS – Expert Control SystemAdvanced hands-on course in FLSmidth's control system platform covering PLC programming and HMI.
  10. 2008
    Siemens S7 Programming IBasic hands-on course in Siemens Step 7 Manager and the SIMATIC S7 systems.
  11. 2008
    CADdy++ / SEE Electrical v.5Basic and advanced courses in the design and production of electrical drawings, including the program's special functions.
  12. 2007
    Electrical licence (autorisation)Approval by the Danish authorities for electricians to be licensed to run a company.
  13. 2007
    LabVIEW Basic IIntensive hands-on course at National Instruments.
Let's talk

Need an extra pair of experienced hands on your next project?

Call or write – and tell us about the machine, the timeline and what you need help with.

+45 2283 8808Mobile – Morten Jensen morten@amagerengineering.dkWrite – we reply as soon as possible

Amager Engineering ApS · Tømmerupvang 23 · 2770 Kastrup · CVR 39 25 35 18